Publicidad
Idiomas disponibles
Idiomas disponibles
EN
C
A
B
D
3. Lop the main support;
Insert the corresponding hole according to the arrow on
the figure.
1. Backrest and armrest installation
B
E
A
4. Fixed the main support with correspondding
screw
E
D
The screw fixing process suggests that each screw hole
should be looselyfixed on the top and then all the screws
should be loosely fixed before they are tightened together
SO that themain frame is installed.
2. Install the muli-function connecting pipe
loosely
Firstly, butt the left and right multifunctional connecting
tubes and then fix the alignment screw holes loosely. If
fixed tightly, it will affect the subsequent installation
smoothly!
5. Strengthen and tighten all the screw .The
product assembly complete
E
D
All the screws are tightened at the end.
C
Publicidad
