Listening To The Radio - Teac LP-R400 Manual Del Usuario

1
FM MODE
1
Select FM or AM using the FM/AM button.
2
Select the station you want to listen to (auto selection).
Hold down the TUNING button (
display begins to change.
< When a station is tuned in, the tuning process will stop
automatically.
< Press the TUNING button (
selection.
Selecting stations which cannot be tuned
automatically (manual selection)
When the or button is pressed momentarily, the
frequency changes by a fixed step.
Press the or button repeatedly until the station you
want to listen to is found.

Listening to the Radio

2
or ) until the frequency
or ) to stop the auto
FM MODE button
Pressing this button alternates between STEREO mode and
MONO mode.
STEREO
FM stereo broadcasts are received in stereo and the
"STEREO" indicator lights in the display.
< If the sound is distorted and the "STEREO" indicator flashes,
the signal is not strong enough for good stereo reception. In
this case, change to MONO mode.
MONO
To compensate for weak FM stereo reception, select this
mode. Reception will now be forced to monaural, reducing
unwanted noise.
If the reception is poor
AM broadcast
Turn around the AM antenna and/or the unit to find the best
position for AM stations.
FM broadcast
Extend and turn around the FM antenna so that you can
receive the stations clearly.
13