Sorting Or Identification Of Conductors By Pair - Chauvin Arnoux LOCAT-N C.A 6681 Manual De Instrucciones

English
3.3.5

SORTING OR IDENTIFICATION OF CONDUCTORS BY PAIR

Preconditions:
The circuit must be dead.
•
The ends of the wires of each pair must be twisted together and be mutually
•
conducting; each pair remains insulated from the others.
Connect the transmitter as shown in Fig. 22.
•
The measurement method is the same as in the example.
•
Remarks:
The ends of each pair must be twisted together (pairwise) in order to ensure
•
perfect continuity.
When several transmitters are used, each transmitter must be set to a
•
different transmission code
If only one transmitter is used, make several measurements with different
•
connections between the transmitter and the various pairs.
62
Fig.22
C.A 6681 Cable Locater