Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
CAUTION: Always unplug the appliance from the mains socket and
allow the warming plate to cool completely before cleaning it. Never
immerse the appliance or power cord into water or any other liquid
for cleaning.
1. Clean all detachable parts after each use in warm soapy water.
2. Wipe the exterior surface of the appliance with a soft, damp
cloth to remove stains.
3. Water droplets may build up in the area above the funnel and drip
onto the product base during brewing. To control the dripping,
wipe off the area with a clean, dry cloth after each use of the
product.
4. Use a slightly damp cloth to gently wipe the warming plate.
Never use abrasive cleaner to clean it.
5. Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, periodically you
should clean away the mineral deposits left by the water according
to the water quality in your area and the use frequency.
It is recommended to descale your coffee maker as follows, using
a solution of white vinegar and cold water. A solution of two
tablespoons (30mL) white vinegar in one carafe of cold water works
best.
1. Fill the tank with the vinegar solution to the maximum level as
indicated on water gauge.
2. Insert glass carafe onto the warming plate.
3. Make sure paper filter (without coffee powder) and funnel are
assembled in place.
4. Switch on the appliance and allow it to "brew" de-scaling solution.
5. After "brewing" one-cup solution, switch off the appliance.
6. Leave the solution stay for 15 minutes and repeat steps 3 to 5.
7. Switch on the appliance and run off the solution until the water
tank is completely empty.
8. Rinse by operating the appliance with water at least 3 times.
57
Publicidad
