Assembly - Hanging the Fan (continued)
7
Mounting the fan-motor assembly
(standard mount)
□
Align the locking slots of the canopy (C) with the two
screws (DD) and alignment post (KK) in the mounting
bracket (A).
□
Push up the canopy (C) and turn clockwise until the
alignment post (KK) engages to the round hole and the
screws (DD) engage to the key slots.
□
Firmly tighten the two mounting screws (DD).
□
Align the oval shape on the canopy (C) with canopy bottom
cover (EE). Push up the canopy bottom cover (D) until the
screw (DD) heads engage to the slots on the canopy bottom
cover (D) so that the magnetic canopy bottom cover (EE)
can be attached to the bottom of the canopy (C) properly.
Assembly - Attaching the Fan Blade
1
Installing the blades to the blade
brackets
□
Attach a blade (G) to the blade arm (F) by aligning the holes on
the blade (G) and blade arm (F) and inserting the screws (AA)
into the holes and through the blade (G) and blade arm (F).
□
Tighten each screw to secure the blade (G).
□
Repeat this step for each blade (G) and blade arm (F).
2
Attaching the blade assemblies to
the motor
NOTE: Your fan features revolutionary advancements for
quick and easy blade installation, including an alignment
post and captive blade bracket screws.
□
Fasten the blade brackets (F) to the fan-motor assembly (E) by
inserting the alignment post into the slot on the bottom of the
motor and tightening the pre-installed blade bracket screws
(BB).
□
Repeat this step for the remaining blade assemblies.
KK
11
Please contact 1-800-986-3460 for further assistance.
AA
G
F
E
BB
F
HOMEDEPOT.COM/HOMEDECORATORS
A
DD
C
B
EE
D
E