GENERAL DESCRIPTION
1. Switch
2. Nozzle
3. Indicator light
4. Handle
5. Cord
6. Lock button
7. Reservoir
8. Brush
SPECIFICATION
- power consumption: 1000 W
- power supply voltage: 230 V ~ 50 Hz
- capacity: 200ml
INTENDED USE
The DA100 steamer is intended for quick and effective ironing of clothes. The appliance is suitable
for all kinds of textiles because scorching or overheating is not probable. Using steam freshens up
the treated materials.
HOW TO USE
Before using the appliance, make sure that the appliance, the plug and the power cable are in good
technical order and whether all parts of the package were removed. Before the first switching of the
steamer, unwind the power cord (5) completely. During the initial period of use of the appliance,
harmless odour may be emitted. This is short-lasting and has no effect on the operation.
FILLING IN WITH WATER
- Before pouring in or replenishing water, make sure that the plug is pulled out of the socket.
- Press the button (6) and slide out the reservoir (7), pull aside the plug and pour water.
- The enclosed container may be used, as its shape is compatible with the inlet opening.
- Close the plug and place the reservoir in the grip (4).
- The reservoir (7) may be filled with clean tap water of room temperature or distilled water.
- Mineral, high-calcium content or storage cell water must not be used.
- Make sure that the water level is not higher than the "MAX" marking on the reservoir (7). At least
1/3 of the capacity of the reservoir (7) should be used for water before starting the steaming.
OPERATION
- The clothing should be hanged, and the pockets emptied.
- Connect the appliance to the mains the indicator light will be activated (3).
- Steaming may be started when the light (3) goes off, which means that that required temperature
has been achieved. The thermostat will maintain the selected temperature, which will be indicated
with the light (3) going on and off.
OPERATING INSTRUCTION
8
STEAMER DA100
2
1
7
6
EN
3
4
5
•
EN
9