Tabla de contenido
Publicidad
6. The next screen prompts you to input the first of three
alignment points, A, B, and C. These alignment points
will inform the machine exactly where the crosslines
are positioned in the hoop. It is extremely important that
the points are accurately input on the cross lines. The
machine is awaiting the input of point A. See figure 3.
Use the shift buttons on the machine to move the hoop,
until the needle comes to point A on the cross line, and
push the OK button.
MULTIPLE HOOP SHIFT BUTTONS AND "CROSS
LINE" INDICATOR LIGHTS FOR INPUTTING POINTS A,
B, AND C
Please Note: The buttons on the machine are lit
to indicate the "cross line" positions of the fabric
in the hoop. The blinking button is indicating the
point to be input.
If a mistake is made when entering the points,
press the clear button, (twin needle/clear button)
to clear the point(s). and then re-enter point(s).
92
Upward
Vers le haut
Hacia arriba Downward
Vers le bas
Leftward
Hacia abajo
Vers la
gauche
Rightward
Hacia la
Vers la droite
izquierda
Hacia la
derecha
A
Shift switch
Commutateur de
changement
Interruptor de cambio
OK switch
Commutateur
d'acceptation
Interruptor OK
Clear switch
Commutateur de suppression
Interruptor de borrado
B
C
Publicidad
Tabla de contenido
