Impecca IEM-1000 Guia Del Usuario página 5

BASIC PRODUCT USAGE
Basic Usage
1. Filling the water:
Take out the water tank, open the silicone cover, fill it with clean
water, and close the silicone cover.
Rubber Cover
2. Put the water tank back into the mop body, and press it to be paral-
lel to the mop body as the below picture shows.
Turn on/off
1. When you put down the pole by the handle, you will hear a click to
activate the product: short press the power button on the handle to
turn it on, the product will start working as the below picture shows.
2. After the power is turned off, please restore the pole to an upright
state, and a click will be heard when it is upright.
3. When the pole is lying flat or not upright, if there is no operation for
30 minutes, the product will goes into sleep state. To state the work-
ing, the pole needs to be upright first, the put down to activate, and
short press the power button to turn on. If the mop product is not
using, the mop pole should be in an upright state to keep well.
5
Water Tank