Chauvin Arnoux F 15 Manual De Instrucciones página 42

For maintenance, only use specified spare parts. The manufacturer can
not be held responsible for an accident occurring after a repair made other
than by its after sales service or approved repairers.
7-1 REPLACING THE BATTERY
The clamp must be disconnected from all electrical sources and not enclose a cable.
The clamp must not enclose any conductor
Set the switch to the OFF position
Undo the tool-release screw and remove the battery cover
Replace the used battery by a 9 V alkaline battery (type CEI 6LF22, CEI 6LR61 or
NEDA 1604)
Replace the battery cover
7-2 CLEANING
The clamp must be disconnected from all electrical sources and not enclose a
cable. Do not subject the clamp to running water.
Keep the jaw faces perfectly clean. The jaw faces must be cleaned with a lightly oiled
soft cloth.
Clean the case with a cloth slightly moistened with soapy water.
Rinse with a dry cloth. Then dry quickly with a cloth or in a hot air stream.
7-3 STORAGE
If the clamp is not used for more than 60 days, remove the battery and store it separately.
7-3 CALIBRATION
It is essential that all measuring instruments are regularly calibrated.
For checking and calibration of your instrument, please contact our accredited laboratories
(list on request) or the Chauvin Arnoux subsidiary or Agent in your country.
7 - MAINTENANCE
42