Adjusting The Skate Size; Setting The Width - Crane ANS-16-052 Manual Del Usuario

Adjusting the skate size

The skates are available in the following shoe sizes:
Class A
44 lbs– –
132 lbs
(20–60 kg)
44 lbs– Size 4.5-7.5
220 lbs
(20–100 kg)
You can adjust the size of the skates without any additional tools.
1. Loosen the quick release strap
2. To loosen the safety lock, push and hold the button
3. Take hold of the boot
• to increase the size of the shoe or
• push it to reduce the size of the shoe.
Read the set size shown on the size indicator
(see Fig. B).
4. Release the button so that the safety lock locks in place with the set size.
Before you use the skates again, make sure that the safety lock has correctly
locked in place.
The shoe size must not change itself while skating.
You have successfully adjusted the shoe size.

Setting the width

With the skates, you can set the boot to four different widths.
1. Pull the rotary knob
2. Turn the rotary knob with the mark
• "–" to reduce the width of the boot
• to "+" to increase the width of the boot (see Fig. E).
1 and the hook and loop fastener
6 at the front and pull it
out as far as possible and hold it tight (see Fig. A).
5
19
Class B
Size 1.5-4.5
–
3
11 on the side of the skates
to
6 or
7 .
(see Fig. B).
Use
11