Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Discard the box and packaging material in
compliance with local regulations.
10.2 INSTALL THE BLOWER TUBE
1.
Move the tube until the tube release button
engages into the slot.
2.
Connect the nozzle to the tube until the the tube
locks into the nozzle.
You can use the nozzle to increase airflow in tight
areas.
10.3 INSTALL THE BATTERY PACK
WARNING
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read and understand the instructions in the
battery and charger manual.
English
TIP
1.
Align ridges on the sides of the battery pack with
the grooves in the battery compartment.
2.
Push the battery pack into the battery
compartment until the battery pack locks into
place.
3.
When you hear a click, the battery pack is
installed.
10.4 REMOVE THE BATTERY PACK
1.
Push and hold the battery release button.
2.
Remove the battery pack from the machine.
11
OPERATION
Make sure the blower tube is in position before
operation.
11.1 START THE MACHINE
1.
Pull the trigger (1) to start the machine.
2.
Pull the trigger fully to increase the speed.
3.
Release the trigger to decrease the speed.
11.2 STOP THE MACHINE
1.
Release the trigger to stop the machine.
11.3 CRUISE CONTROL LEVER
1.
Pull the cruise control lever clockwise to increase
the speed. This will lock the speed at the desired
setting.
2.
Push the cruise control lever counter clockwise to
decrease the speed.
9
WARNING
1
EN
Publicidad
