Livoo TES255 Manual De Instrucciones página 10

EN
Note: The battery charge is regularly shown on the main display when the device is switched on (Figure
2, last image).
Power button
Press and hold the power button to turn the unit on or off.
When listening to music, press this button to pause or resume music playback.
M button
Press this button to change the mode. Two modes are available: "Bluetooth" and "Clock" which simply
displays the time.
Press and hold to change the time format (12H or 24H format).
Volume control and track change
In Bluetooth mode, briefly press (-) to start the previous song. Briefly press (+) to play the next song.
Press and hold to increase (+) or decrease (-) the volume.
SET button
Press this button briefly to activate the first alarm, activate the second alarm, activate both alarms or
deactivate all alarms in succession. The activated alarm(s) are indicated on the display (see Figure 1,
point 1 & 2).
Press and hold the SET button to set the clock and alarms. The parameter that you can change will flash.
To increase or decrease the value of this parameter, use the (+) or (-) button. To change to another
parameter, briefly press the SET button.
Press the button twice briefly to switch the light in the cabinet on or off.
Bluetooth connection
Activate the Bluetooth settings on your mobile phone and search for the TES255.
When pairing is successful, your mobile phone will display 'Bluetooth connected'.
Open the music player on your device and play music. It will play on the speaker.
In Bluetooth mode
Answer a call: Press the power button to answer. The speaker has a built-in microphone.
Hang up: Press the power button to end the call.
Reject call: When called, press and hold the power button to reject the call.
TF card reader (Micro SD card reader)
Turn on the device and insert the TF card into the card slot. Press button M to switch to 'TF card' mode.
You can play the music previously recorded on your card.
Setting the alarm (Figure 2, first and second image)
To set an alarm time, you must first activate either Alarm 1 or Alarm 2 by briefly pressing the SET button.
When one of the two alarms is activated, a symbol is displayed below the displayed time (see Figure 2).
NOTE: If Alarm 1 is displayed, you will be able to set Alarm 1. If Alarm 2 is displayed, you can set Alarm 2. If
neither or both alarms are displayed, you can only set the time.
Press and hold the SET button. The set time of the activated alarm flashes indicating that you can
change this setting.
Briefly press the SET button to confirm the hour and move to the minute setting.
To change the settings, use the (+) or (-) button.
To confirm the set time, press and hold the SET button for a few seconds.
www.livoo.fr