Homewerks 7140-50-G3 Manual Del Usuario página 6

NEW CONSTRUCTION INSTALLATION INSTRUCTIONS (Continued)
4. Remove the wiring box cover from the fan housing (A).
5. Remove the wiring box cover from the fan housing (A). Pull
the house wires through the hole in the wiring box cover.
Using the quick connectors, connect the house wiring from the
wall switch to the fan housing (A). 14 AWG is the smallest
conductor that should be used for branch-circuit wiring. Please
refer to the wiring diagrams on page 4 to ensure proper wire
connections are made.
Carefully push the wire connections into the wiring box
housing and reattach the wiring box cover.
CAUTION: If your electrical wires do not match the colors
listed, consult a licensed electrician to determine what each
house wire represents before connecting the fan.
6. Connect a 4 in. circular duct to the duct connector on the fan
housing (A), securing it with duct tape or a clamp. Vent the
duct to the outside.
Finish ceiling work. The ceiling hole should be aligned with
the edge of the fan housing (A).
7. Plug the fan motor plug into the fan housing (A).
All manuals and user guides at all-guides.com
6
4
A
Wiring box
cover
5
Wiring box
cover
6
A
7
Quick
connector
Wiring
box cover
4 in.duct
Ceiling
Duct tape
or clamp
A
4 hole
Homewerks.com