Genie LA 200 Instrucciones De Funcionamiento página 13

Cleaning and care
1. Please pull out the plug from the mains socket outlet always, in order to clean
the machine. Take care while doing so that the plug does not come into
contact with any liquids.
2. Allow the machine to cool down before cleaning it.
3. Clean the machine with a slighly moist, soft cloth. Do not use any caustic or
abrasive cleaning agents while doing so.
Clean the trimmer and corner cutter at regular intervals.
1. Use a slightly damp, lint-free cloth to clean the surfaces of the devices. Do not
use any solvents or cleaning agents.
2. Remove any cut material with a brush.
Delivery:
Laminator GENIE LA 200
Instruction manual
Trimmer
Corner cutter
Laminating pouches (10 × A4, 10 × A5, 10 × A6, 20 × business card)
Technical data
Laminator
Mains voltage (V)
Consumption
Laminating width
Film of utilizable thickness
(microns)
Heating up time
Speed
Dimensions
Weight
Trimmer
Maximum cutting capacity
Cutting length
The CE Mark on the device confirms conformity.
The Declaration of Conformity can be read online at
www.go-europe.com.
230 V to 240 V ac, 50 Hz
265W
230 mm
80 minimum, 125 maximum
3-5 min. approx.
220 mm / min
ca. 330 x 106 x 60 mm
910 g
3 sheets, 80 g/m²
300 mm
13