Cardin Elettronica INTBT C4 Manual página 6

ENGLISH
Remarks
These instructions are aimed at professionally qualified "installers of electrical equipment" and must respect
the local standards and regulations in force. The use and installation of these appliances must rigorously
respect the indications supplied by the manufacturer and the safety standards and regulations in force.
Attention! Only for EU customers - WEEE marking. This symbol indicates that once the products
life-span has expired it must be disposed of separately from other rubbish. The user is therefore
obliged to either take the product to a suitable differential collection site for electronic and electrical
goods or to send it back to the manufacturer if the intention is to replace it with a new equivalent
version of the same product. Suitable differential collection, environmental friendly treatment and disposal
contributes to avoiding negative effects on the ambient and consequently health as well as favouring
the recycling of materials. Illicitly disposing of this product by the owner is punishable by law and will be
dealt with according to the laws and standards of the individual member nation.
Description
The interface with a bluetooth module allows the control of four relays with NO or NC contacts. The selection
dip-switches (one block per relay) allow you to select the relay's activation method: impulsive, ON/OFF, timer
controlled or remotely controlled relay activation using the programming calender in the Cardin multiprotocol
interface Cardin RCQ504/508W00. The programming buttons (one per relay) allow you to set the activation
times for the relays (from 1 s to 5 min) for the timer controlled mode.
Use
The interface allows the activation of electrical and electronic appliances via cable, it is controlled by bluetooth
with its best use in the following areas: automatic opening systems, alarm systems, and in all systems which
require remote control (without wires).
IMPORTANT REMARKS
6
ENGLISH