Publicidad
Idiomas disponibles
Idiomas disponibles
ERROR TYPE
E10
E11
If you are experiencing a problem with your
refrigerator, please check the following
before contacting the after-sales service.
Your refrigerator does not operate
Check if:
• Your fridge is plugged in and switched on
• The fuse has blown
• Is the temperature adjustment right?
• The socket is faulty. To check this, plug
another working appliance into the same
socket.
Your refrigerator is performing poorly
Check if:
• The appliance is overloaded
• The doors are closed properly
• There is any dust on the condenser
• There is an adequate distance
between the appliance and
surrounding walls
Your refrigerator is operating noisily The
following noises can be heard during
normal operation of the appliance.
Cracking (ice cracking) noise occurs:
• During automatic defrosting.
• When the appliance is cooled
or warmed (due to expansion
of appliance material).
MEANING
Likely to occur after: -
Long term power
Fridge
failure.
compartment is
- Hot food has been
not cold enough
left in the fridge.
Fridge
compartment is
too cold
WHY
Various
Clicking noise occurs: When the
thermostat switches the compressor
on/off.
Motor noise: Indicates the compressor
is operating normally. The
compressor may cause more noise for
a short time when it is first activated.
Bubbling noise and splashing occurs:
Due to the flow of the refrigerant in
the tubes of the system.
Water flowing noise occurs: Due
to water flowing to the evaporation
container. This noise is normal during
defrosting.
Air blowing noise occurs: During
normal operation of the system due
to the circulation of air.
There is a build-up of humidity
inside the fridge
Check if:
• All food is packed properly.
Containers must be dry before
being placed in the fridge.
• The fridge doors are opened
frequently. Humidity of the room
will enter the fridge each time the
doors are opened.
EN - 92
WHAT TO DO
1. Set the fridge temperature to a
colder value or set Super Cool.
This should remove the error
code once the required
temperature has been reached.
Keep doors closed to improve
time taken to reach the correct
temperature.
2. Please empty the location
at the front area of air duct
channel holes and avoid
putting food close to the sensor.
If this warning continues an
authorised technician needs
to be contacted.
1. Check is Super Cool mode is
activated
2. Reduce the fridge
compartment temperature
3. Check to see if vents are clear
and not clogged
If this warning continues an
authorised technician needs
to be contacted.
V.2
Publicidad
