Publicidad
Idiomas disponibles
Idiomas disponibles
Plantillas de Vitrocerámica
Installation
This appliance must be correctly installed by a suitably
qualified
manufacturer's instructions.
This appliance should be connected to a circuit that incorporates an isolating
switch which can be accessible by the user after installation providing full
disconnection from the power supply. The disconnection may be achieved by
incorporating a switch in the fixed wiring in accordance with the wiring rules.
• We decline any responsibility for injury or damage, to a person or
property, because of improper use or installation of this appliance.
• Heat, steam, and moisture will be created during the use of the
appliance, take care to avoid injury, and ensure that the room is
properly ventilated. If the appliance is going to be used for prolonged
periods, then additional ventilation may be required.
• The kitchen area should be dry aired and equipped with efficient
ventilation. Ensure easy access to all control elements during the hob
installation.
• If the hob is installed next to a piece of furniture, use a coating or veneer
with a heat-resistant adhesive (100 °C) to prevent surface deformation
or detachment of the coating.
•
Please consult with your qualified installer if you are in any doubt about
the amount of ventilation that is required.
E-IV. Technical Specifications
Electrical details
Rated Voltage: 220-240V AC 60 Hz.
Supply Connection: 30 A (double pole switched fused outlet with 3mm
Min Fuse Protection Rating: 32 A
Mains Supply Connection Cable: 3 core x 1.5 mm2
Note: for cable connection details, see diagram on appliance base plate.
person,
strictly
contact gap)
www.derkochline.com
in
accordance
Ceramic Hob
with
the
28
Publicidad
