Descargar Imprimir esta página

Klarstein MATTERHORN BREEZE Manual Del Usuario página 25

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Avoid open flames and sources of ignition in the vicinity of the device.
Ventilate the room in which the device is located thoroughly and regularly.
It is dangerous to modify this product in any way. Any damage to the cord can
cause a short circuit, fire, or electric shock.
All electrical components such as the plug, power cord and compressor may
only be replaced by a certified service centre or by qualified service personnel.
The power cord must not be extended.
Make sure that the mains plug is not crushed or damaged. A crushed or
damaged mains plug can overheat and cause a fire.
Make sure that you can access the mains plug of the device at all times.
Do not pull on the mains cord.
If the outlet is loose, do not insert the power cord. There is a risk of electric
shock or fire.
This unit is heavy. Be careful when moving it.
Do not touch the freezer compartment when your hands are damp or wet as
this may cause abrasions or cold burns.
Do not place the device in direct sunlight.
This appliance is intended for use in households and similar environments.
These include:
-
Staff kitchens in shops, offices and other work environments
-
Farms, hotels, motels and other residential establishments
-
Guest houses that offer breakfast (Bed & Breakfasts)
-
Catering and similar non-retail applications
This unit contains the refrigerant Isobutane (R600a), a natural gas that has
high environmental compatibility, but is flammable. Although it is flammable, it
does not damage the ozone layer or increase the greenhouse effect. The use of
this refrigerant results in a slightly higher noise level of the unit. In addition to
the compressor noise, you can hear the flow of refrigerant. This is unavoidable
and has no negative effect on the performance of the device. Be careful during
transport to avoid damage to the refrigerant circuit. Refrigerant leaks can
irritate the eyes.
EN
25

Publicidad

loading