Ecoflam MAX 1 R Low NOx TC 230-50-60 TW B10 Manual Del Usuario página 14

EN
Start up
- Setting data table - Air regulation
NOZZLE
gph spry
0.50 60°S
0.55 60°S
0.60 60°S
0.65 80°S
0.75 60°S
0.50 60°S
0.55 60°S
0.60 60°S
0.65 60°S
0.75 60°S
0.85 60°S
1.00 60°S
The settings above are basic settings.
These adjustment values are normally
suitable for commissioning the burner.
These values have been determined in
our test labs and are useful for the first
A
B
MAX 1
14 www.ecoflam-burners.com
PUMP OUTPUT
bar kg/h
12 1,75
12 1,84
12 1,92
12 2,4
12 2,8
12 1,75
12 1,84
12 1,92
12 2,4
12 2,8
12 3,1
12 3,8
switch-on as final setting must be done
using a combustion analyzer.
Favourable combustion values can be
achieved using the following nozzles:
A
MAX 1
B
FIRING HEAD SETTING
Pos.
2
2
MAX 4 Air damper setting (A).
To act on the screw in figure:
• to increase output, turn screwdriver
• to reduce output, turn screwdriver
Firing head setting (B).
To act on the screw in figure:
• turn Allen key till you reach the
MAX 4
AIR DAMPER SETTING
Pos.
4
4
DANFOSS H÷S 80°÷60°
DELAVAN W 60°
STEINEN S 60°
clockwise
counterclockwise
requested value (index 0-4,5).
420010474600