Publicidad
Idiomas disponibles
Idiomas disponibles
+
12V DC
Switch
-
Wiring Diagram
Glass Cover Replacement
1. Align the top glass
cover assembly with the slots on the
cooktop and place it into the cooktop. (Fig. 9)
Fig. 9
2. Press the backside of the top glass cover and you will
hear a click noise. The top glass cover is now locked into
place. (Fig. 10 and Fig. 11)
Fig. 10
Fig. 11
Ignition
Right
Center
Left
Knob
Burner
Burner
Burner
LED
Knob LED
Knob LED
Knob LED
Leak Check
FIRE OR EXPLOSION
● Extinguish all open flames.
● NEVER leak test when smoking. Never use a flame.
● Do not use the appliance until connection has been leak
tested and does not leak.
● Pressure/Leak test using 11-13.8 WC pressure.
● Gas leaks may occur in your system and result in
a dangerous situation. Always perform a leak test
for possible leaks according to the manufacturer's
instructions after installation and before any operation.
● Gas leaks may not be detected by smell alone. Gas
suppliers recommend you purchase and install a UL
approved gas detector.
1. Make sure all control knobs are in the OFF position.
2. Apply a gas leak detection liquid to the connections.
gas leaks will be indicated by bubbles.
3. If a gas leak is detected, tighten the loose joint, or replace
the faulty part with a replacement part recommended by
Furrion authorized retailer.
- 9 -
WARNING
WARNING
CCD-0005608 Rev: 08-28-23
Any
Publicidad
