Trouble Shooting; Fault Correction - Parkside Performance PPKSA 40-Li A1 Traduccion Del Manual De Instrucciones Originales

Trouble shooting

Problem
Device does not start
Chain does not turn and
warning tone sounds
Inferior cutting perfor-
mance
Saw­runs­with­difficul-
ty,­chain­comes­off
Chain­becomes­hot,­
smoke development
during­sawing,­discol-
oration of the rail
Possible cause
The battery­(16)­is empty or
not inserted
Defective On/Off switch­(2)­
Defective motor
Chain brake blocks saw chain
(6)
Incorrectly mounted
saw chain­(6)
Saw chain­(6)­blunt
Chain­tension­insufficient
Chain­tension­insufficient
Too little chain oil

Fault correction

Check­the­charge­level,­and­
have repairs carried out by a
qualified­electrician,­if­necessary.
Repair by customer service
Repair by customer service
Check chain brake.
Possibly release chain brake
Mount saw chain correctly
Sharpen cutting teeth or place
on new chain
Check chain tension
Check chain tension
Check­oil­level­and,­where­ap-
propriate,­refill­with­chain­oil,­
check­oil­automatic­system­and,­
where­appropriate,­clean­oil­
outflow­duct­or­have­repaired­
by customer service
GB MT
63