Publicidad
Idiomas disponibles
Idiomas disponibles
1
•
•
Open HARDWARE FOR STEP 1.
•
Attach LEFT CON SOLE M AST (3) to BASE FRAM E (2) using 4 BOLTS (B)
and 4 FLAT WASHERS (C) from the top and bottom .
•
Attach RI GHT CON SOLE M AST (6) to BASE FRAM E (2) using 4 BOLTS (B)
and 4 FLAT WASHERS (C) from the top and bottom .
NOTE: Be careful not to pinch wires while attaching the handlebar.
A
B
Bolt
C
Flat Washer
A
3
B
C
6
M OTOR COVER (1).
2
8
8
1
6
2
•
Open HARDWARE FOR STEP 2.
2
•
Connect the HEART RATE GRI P WI RE (12) , discard the wire tie, and tuck the cables
inside the LEFT HAN DLE BAR (8) and slide into the CON SOLE BASE (9).
•
Connect the HEART RATE GRI P WI RE (13 ), discard the wire tie, and tuck the cables
inside the RI GHT HAN DLE BAR (10) and slide into the CON SOLE BASE (9).
•
Attach HAN DLEBARS (8 & 10) to CON SOLE BASE (9) using 4 BOLTS (E) and 4
CURVED WASHERS (F).
E
Bolt
4
F
Arc Washer
4
9
12
F
E
8
13
10
Publicidad
