Publicidad
Idiomas disponibles
Idiomas disponibles
Display
Fabric
Synthetics
Wool
Silk
Polyester
Nylon
Acrylics
Acetate
Tempera-
Low
Medium
ture
Symbol
on clothes
label
Ironing
Iron without
Steam
instruction
steam
ironing on
inside out
the left with
a cloth
Steam
selection
NOTE:
The iron heats up faster than it cools down. Start ironing with
the lowest temperature setting.
CAUTION:
When changing from a higher to a lower temperature the blue
indicator starts flashing fast. This means that the temperature
is too high for the setting. Do not singe your laundry!
Only continue ironing after the blue indicator stops flashing
and an acoustic signal is emitted.
Water Tank (7)
•
The water tank has a recessed grip on the bottom so that it
can be removed.
•
The lock of the water tank is also the lime filter cartridge.
Take out the lime filter cartridge to fill with water. With this,
proceed as described under "How can I replenish the water
during operation?".
•
The tank volume is 1.0 litres.
•
The tank illumination lights once the mains plug has been
inserted into the outlet. It indicates readiness for steam
ironing when the lime filter cartridge and the water tank
have been set correctly.
Water
Use only tap water or distilled water.
Do not fill battery water, water from the clothes dryer and water
containing additives (such as starch, perfume, softener or other
chemicals) into the water reservoir.
This could damage the iron due to residues forming in the
steam chamber. These residues may cause impurities to the
fabric when dropping out of the holes in the soleplate.
40
Before Initial Use
Rayon
Rayon
•
Cotton
Cotton
•
Linen
Linen
Ironing without steam
High
Highest
Sort out the garments according to their ironing temperatures.
1. If the handle should still be in the carrying position, unlock
Iron while
Iron with
2. Place the iron on the rest (5).
the fabric is
steam
3. Only connect the machine to a properly installed safety
still damp
4. Use the selector button SET (11) to set the temperature.
•
•
•
After use press the selector button SET (11) repeatedly until the
red control lamp flashes in the display. Disconnect the mains
plug from the socket.
Steam Ironing
The iron expels a large quantity of hot steam. Danger of burns.
•
•
Please proceed as follows:
1. The tank should only be filled up to the maximum mark.
2. Close the water tank and place it back in the base.
3. Connect the base station to a socket with earthing
Operation
Clean the ironing base with a slightly damp cloth.
In order to remove all residues before initial use, please
pass the iron a few times over an old clean cloth.
NOTE:
the lock as described above under "Function of the Handle".
socket.
If you have sensitive items to iron, please begin with the
lowest temperature.
NOTE:
The selected temperature lights up blue and flashes
slowly. The iron heats up. The operating temperature is
reached as soon as the blue display stops flashing and a
beep sounds. Now you can start ironing.
The iron is electronically held at a constant temperature
during use. If the blue indicator in the display flashes
slowly, the appliance is in the process of heating up.
If the blue indicator flashes quickly in the display, the tem-
perature for the set position is still too high. Do not scorch
your washing! Only continue to iron if the blue indicator
stops flashing and a beep sounds.
WARNING:
CAUTION:
When using the steam iron please ensure that the water
tank is always filled to the required level.
The lime filter cartridge always has to be positioned in the
water tank, even if you use distilled water.
CAUTION: Initial use:
Do not overfill!
contact.
Publicidad
