Descargar Imprimir esta página

LANDMANN Miton PTS 3.1 Instrucciones De Montaje página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12
6
Part list
Item
Qty. Part name
1
1
Cart base
2
Wheel (front)
2
3
Wheel, adjustable (rear)
2
4
Side table bracket
1
5
1
Side panel, left
6
1
Side panel, right
7
1
Cart back panel
8
Cross bar
1
9
Side burner ignition cable
1
10
1
Barbecue unit, pre-assembled
11
1
Lower cupboard door
12
1
Door pin, bottom
13
Side burner flame regulator
1
14
Side Shelf
1
15
Side burner bracket
1
16
1
Side burner unit
17
3
Flame Tamer
18
3
Cooking Grill
19
Warming rack
1
20
Fat collection tray
1
21
1
Grease tray
22
-
-
23
1
Magnet
24
Burner, side burner
1
25
Side burner shelf
1
Guarantee claims and warranty
Your LANDMANN barbecue left the factory
in a technically flawless condition.
For this reason, in addition to your statutory warranty claims
LANDMANN also offers an extended quality and durability
warranty against rusting through on the following parts:
Burner
Any warranty and guarantee claims shall become void in the
event of improper use of the barbecue or the use of non-approved
fuels. Discolouration, rusting or slight deformation of parts
exposed directly to the flames (cooking grill, hotplate, burner,
flame tamer, etc.) do not impair the function of the barbecue
and, as such, do not form a basis for any warranty claims.
Please retain your receipt in case you need to make a warranty claim.
Placement of the gas cylinder during use
The gas cylinder can be stored in the base cabinet during use, provided
that it does not exceed the specified maximum dimensions (see page
3). Place the gas cylinder in the recess provided for this purpose in
the base.
Larger gas cylinders can also be set up outside of the barbecue as long
as they do not exceed the maximum height of 700 mm.
EC – Declaration of Conformity
We, LANDMANN GmbH & Co. Handels-KG, hereby declare that the
gas appliance described here complies with EU regulation 2016/426.
Conformity has been verified by a type examination according to EN
498:2012 and EN 484:1998.
The type examination was carried out by the notified body TÜV
Rheinland. (1008).
Product identification number: 1008 CR3037
Please contact our service department for further information.
5 years

Publicidad

loading