Miniland digimonitor 4.3' pro Manual Del Usuario página 12

ENGLISH
INDEX
1. INTRODUCTION
2. CONTENTS
3. SAFETY INSTRUCTIONS
4. PRODUCT FEATURES
5. INSTRUCTIONS FOR USE
6. MAINTENANCE
7. TROUBLESHOOTING
8. TECHNICAL SPECIFICATIONS
9. INFORMATION ON DISPOSAL OF BATTERIES AND PRODUCT
1. INTRODUCTION
Congratulations for purchasing this wireless color baby monitor which
incorporates the latest technology. We are sure you will be completely
satisfied with the quality and features of this product. Nevertheless, we
recommend you to read these instructions carefully to get the best results
from your purchase.
This baby monitor allows you to transmit audio/video signals wirelessly to
be received on the color monitor, which is ideal for many situations such
as, monitoring of babies, young children or the elderly.
Note: The features described in this user manual may be subject to
change without notice.
2. CONTENTS
1 Camera (Baby Unit)
1 Monitor (Parent Unit)
2 AC/DC adapters
1 Instruction manual
1 Guarantee Card
If any of the items listed above is missing, contact your dealer.
3. SAFETY INSTRUCTIONS
Read this instruction manual carefully before using your baby monitor for
the first time and keep it for reference use in the future.
3.1. GENERAL SAFETY INSTRUCTIONS
When using electrical equipment it is necessary to take certain basic
safety precautions at all times:
1. It is necessary to exercise caution when any product is used by or in
the vicinity of children or elderly persons. Keep the appliance out of reach
of children.
2. This product should not be used as the sole means of surveillance, not
being under any circumstances a substitute for responsible supervision
of children, elderly persons or property by adults.
3. This unit should only be used with the AC power adapters included in
this package (rated 5.0V, 1A).
4. This product contains small parts. Exercise care when unpacking and
assembling the product.
5. DO NOT allow children to play with the packaging materials such as
plastic bags. Exercise care when unpacking and assembling the product.
6. DO NOT use the appliance if the cord or plug is damaged. If your baby
monitor is not operating properly or has suffered any damage, contact
the authorized Miniland service center to request inspection and repair
of the appliance in order to avoid any possible risk.
7. DO NOT attempt to repair or adjust any of the electrical or mechanical
functions of the unit since, if you do, the guarantee will be made void.
8. Check the voltage of your home in order to ensure that it matches the
voltage indicated in the specifications of the appliance.
9. If you are not going to use the baby monitor for a long period of time,
always unplug the power adapter. To disconnect the appliance from the
mains, hold the transformer and remove the plug from the socket. Never
pull on the cord itself.
10. This product is designed for indoor use only. The unit should not be
exposed to rain, moisture, dripping or splashing. No objects filled with
liquid should be placed on top of, or beside the product, such as a glass
or vase. This item should not be used near water.
11. Before using your baby monitor for the first time, remove all the
protective plastic wrapping from both the monitor and the camera.
CAUTION
· This baby monitor is designed to give parents peace of mind when they
are unable to be in the same room as their baby. This product is not a
substitute for supervision by adults. It is necessary for one parent to stay
near the monitor when in use. The baby monitor is not a medical device and
you should not entrust the welfare of your baby to it. It is important that you
regularly visit the baby's room in person to ensure that everything is in order.
· Never use this baby monitor in cases in which the life or health of the
baby or other people, or the integrity of a building, depend on its operation.
The manufacturer accepts no liability or claim for death, personal injury or
property damage resulting from the malfunction or misuse of the product.
· Misuse of this Wireless Baby Monitor could result in legal action.
· Use this product responsibly.
IMPORTANT: Please note that any change or modification to the
equipment not performed by the Miniland technical service will not
be covered by the product guarantee.
3.2. TIPS FOR RADIO INTERFERENCE
This equipment has been tested and meets the requirements of Directive
RED 2014/53/UE. These requirements are designed to offer reasonable
protection against harmful interference in a residential installation.
If the unit is not installed and used according to the instructions, it could
cause harmful interferences to radio communications.
Note, however, that there is no guarantee that interference will not occur
in a particular installation. If the baby monitor causes interference to
the radio or television, which can be determined by switching it on and
off, you are recommended to try and correct the interference as follows:
· Reorient or change the position of the receiver.
· Increase the distance between the equipment in question and the
baby monitor.
· Connect the equipment to a different socket from the one used for
the receiver.
· Check with the Customer Service Department. To ensure compliance with
Directive RED 2014/53/ UE, this equipment has special shielded cables.
Operation with non-approved equipment or with unshielded cables will
probably cause interference to radio and television reception.
3.3. CHOOSING A SUITABLE LOCATION
· Place the electronic device out of the reach of children in order to
avoid accidents.
· Children can become entangled in cords. The baby unit should be placed
at a distance of at least 1 to 1.5 meters from the baby's cot. Never place
the baby unit inside the cot, bed or playpen, or attach the tripod to them.
Make sure the unit, cables and adapter are out of reach of the baby and
other young children.
· Place the baby monitor in a place where the air can circulate freely. Do not
place on soft quilts or blankets, or in the corners of cupboards, shelves, etc.
· Place the baby monitor away from heat sources such as radiators,
chimneys, cookers and direct sunlight.
· Place the camera away from TV sets, repeaters and radios. The intense
radio signals generated by these elements could cause noise or even
sounds and images to appear on the monitor. If this occurs, move the
camera to another location.
· This monitor can be placed on a tabletop by using the retractable
table stand on the back of the monitor. When not in use, simply fold
up completely.
4. PRODUCT FEATURES
4.1. MONITOR FUNCTIONS AND CONTROLS
MONITOR (FIGURE 1)
1. On/ Off button
2. Power LED
3. Volume LEDs
4. LCD Screen
5. Menu
6. Up navigation button / increase volume
7. Right navigation button / increase brightness
8. Down navigation button / decrease volume
9. Left navigation button / decrease brightness
10. OK/ zoom button
11. Go straight to tunes
12.Talk to the baby key
13. Microphone
14. USB-C power connector
15. Antenna
16. Reset button
17. Collapsible rack
18. Speaker
DISPLAY (FIGURE 3)
A. Signal level
12