TYPE OF RISKS
Emergency stop.
Principles of integration of secu-
rity and information.
Signals.
Maintenance.
Residual risks.
The technical characteristics and performances of the components mentioned below are documented in the respective installation ma-
nuals or in the label on the component.
Drive group/motor:
Control unit:
Photocell:
Radio device:
Alarm lamp:
EVALUATION CRITERIA AND SOLUTIONS TO ADOPT
*If appropriate, install an emergency stop command.
*IMPORTANT: Check that the emergency stop does not create new risks, verifing
the functioning of safety devices installed.
*Apply all necessary signs or warnings to indicate residual risks and potential
non-compliant uses.
*A maintenance plan must be established and performed. Check every 6 months as
minimum that the safety devices work correctly.
*Inform users about the presence of residual risks and the potential inadequate use.
LIST OF INSTALLED COMPONENTS
G.R. - GR402A1IV24ND/S
JOYECH - PK300DCM - V2
JOYTECH - IR30
V2 - TRC4
HILAND TECHNOLOGY - F5093 o F5010
17