Braun Aesculap Acculan 3Ti Instrucciones De Manejo/Descripción Técnica página 14

9.2.1 Coupling the saw blade
►
Insert the saw blade with its coupling end in the
slot of saw blade coupling 8.1 as far as it will go.
Ensure that the locking pin engages in the saw
blade fenestration, and that the lateral stops of the
saw blade rest on the coupling.
►
If necessary press button for saw blade release/fix-
ation 8.2.
►
Check that the tool is seated properly: Pull at the
saw blade.
9.2.2 Uncoupling the saw blade
►
Fully press down the button for saw blade
release/fixation 8.2.
►
Extract the saw blade from saw blade coupling 8.1.
9.3 Technical data
Dimensions L x W x H, in mm 89 x 36 x 44
Weight, in grams
Gear ratio
Stroke frequency in 1/min
Saw blades max. working
length in mm
10. Preparation
Non-compliance with the following instructions will
preclude all responsibility and liability in this respect
on the part of Aesculap.
12
GB660R
approx. 270
1.5:1
max. 17 000
50
11. Working with the attach-
ments
Risk of infection and contam-
ination!
Product is delivered unsteril-
WARNING
ized!
►
Risk of injury and material
damage due to inappropriate
use of tools!
WARNING
►
►
Damage to the product if
dropped!
►
WARNING
Risk of burns to skin and tissue
through blunt tools or if prod-
uct has not been maintained
WARNING
properly!
►
►
►
Sterilize the product
before use pursuant to the
operating instructions.
Always follow the safety
advice and information
given in the instructions
for use.
When coupling/uncou-
pling, handle tools with
cutting edges with care.
Use the products only if
they are in perfect techni-
cal condition, see Function
check.
Use tools only if they are in
perfect condition.
Replace blunt tools.
Maintain the product
properly, see maintenance
guide.