Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Warning!
The Vac-Blower must not be used or switched on until it has been fully assembled.
Assembly (Pic.2)
Insert the intermediate suction/blower tube (Pic.2)(2.1) into the Vacuum-Blower body
ensuring that it is fitted correctly and pushed fully home and secure with the two screws
provided. Fit the wheeled suction-blower tube into the intermediate suction-blower tube
(Pic.2)(2.2). Ensuring that it is fitted correctly and pushed fully home.
Fixing the wheels(Pic.3)
Get the wheel screw through the front small hole (Pic.3.1),tighten the wheel nut until the
wheels fully installed(Pic3.2).
Fitting the adjustable handle(Pic.4)
Insert the adjustable handle to into the Vacuum-Blower body(Pic.4.1)adjust the bandle to
suitable yourself,tighten knob screw(until the handle fully fasten(Pic.4.2)
Publicidad
