Silvercrest SHF 1800 A2 Instrucciones De Servicio página 99

11. Operation
DANGER of burns!
During operation, the surfaces of the de-
vice may become hot. Do not touch any
hot parts of the device such as the air
outlet 21 on the back or the inspection
window 6.
Use the handle 11 to lift out the hot ro-
tating basket 12 / rotary spit 10.
Use oven gloves or potholders to touch
the hot accessories.
During frying, hot steam escapes from
the air outlet 21. Be careful not to put
your hands into the steam.
Do not move or transport the hot air fry-
er 1 while it is switched on.
11.1 Before using for the
first time
Before using the device for the first time, it
must be operated for 1 hour in an unfilled
state (without food).
1. Read the user instructions and familiar-
ise yourself with how to use the device.
2. Switch the device on using the Start/
Stop button
31.
3. Press the program button
French fries program. The symbol flash-
es.
4. Use the timer buttons
the cooking time to 60 minutes.
5. Start the cooking process with the Start/
Stop button
31.
• When the program has run to the end,
OFF appears in the display 2 and a sig-
nal sounds. The fan continues to run for
approx. 20 seconds before 5 beeps
sound and the device switches to stand-
by.
NOTE: when in operation for the first time,
some smoke and odour may be generated
by the device. This is due to the assembly
materials used for the heating element and
is not a fault in the product. Ensure adequate
ventilation.
11.2 Power connection
• When the device 1 has been installed
11.3 The touch display
On the touch display 2 there are symbols
that only display certain functions, e.g. the
hot air symbol
Other symbols (also) represent a button, e.g.
33 for the
the Start/Stop button
tons' is used in this instructions for buttons
and keys to make the text easier to read.
+/– 29 to set
11.4 Switching on/off
• Press the Start/Stop button
for the desired purpose, insert the mains
plug 20 into an earthed wall socket
which corresponds to the specifications
on the rating plate. The wall socket must
also be easy to reach after switching on
the device.
- All indications in the display 2 light
up briefly.
- An acoustic signal is heard.
- Then the symbol
button 31 will light up. The device is
in standby mode.
23.
der to switch on the device 1 from
standby.
- The symbols in the display 2 are
shown.
- The set temperature and cooking time
are displayed alternately.
for the Start/Stop
31. The term 'but-
31 in or-
97
GB