Publicidad
Idiomas disponibles
Idiomas disponibles
BURNER MARKINGS
These pictograms are used to bring to your attention the following important safety messages:
This warning message is also on all burners to bring to your attention important safety messages:
• WARNING Filling an alcohol fuelled device while lit has caused severe burns and deaths. When refilling
use containers with a flame arrestor.
• When refilling first check the flame is extinguished and that the device is cool. Hot Surfaces. Keep
children away. Refer to the Operations Manual for instructions before use.
Installation and location
- Installed and operated in a fixed and secure position before filling,lighting and operating. Burners are not
meant to be moved because movement creates the risk of accidental fuel spillages. If you move the Burner,
make sure no fuel was spilled before you ignite the Burner
- In a large, open space at least 1500mm [59.1in] away from any combustible materials, such as curtains,
wallpaper, veneer, etc.
- NOT INSTALLED DIRECTLY BESIDE OR NEAR WALLPAPER, LAMINATE, VENEER OR ANY
SURFACE THAT HAS NOT BEEN FIRE RATED.
HOW TO OPERATE THE BURNER
1，Filling the burner
WARNING: Fire hazard. Be sure Burner is cool before filling. Let stand at least 60 minutes after flame is
extinguished before refilling.
WARNING: Refuel only through the filling point. Never pour fuel directly onto the burner.
WARNING: Fire hazard. Do not overfill. Only about 80% of the capacity can be filled up.
Keep hands and face the length of the lighting rod away from the Burner at all times, particularly when
igniting. Before lighting, ensure that the Burner is clear and ready for use. Open the slider fully and wait
for 60 seconds for the residual fumes to dissipate before lighting.
MAX
MAX
7 / 52
Publicidad
