HAMPTON BAY 56058 Guía De Uso Y Mantenimiento página 11

Assembly - Hanging the Fan (continued)
7
Mounting the fan motor assembly
(standard mount)
WARNING: When using the standard ball/downrod
mounting, the tab in the ring at the bottom of the
mounting bracket must rest in the groove of the
hanger ball. Failure to properly seat the tab in the
groove could cause damage to the wiring.
NOTE: The magnet is pre-attached on the canopy bottom
cover for you to remove and install easily.
NOTE: For better performance with the Wi-Fi system, the
Wi-Fi antenna must be mounted to the ceiling outside of
the fan's ceiling canopy.
□
Align the locking slots of the canopy (C) with the two screws
(HH) and alignment post (KK) in the mounting bracket (A).
□
Push up the canopy (C) and turn it clockwise until the
alignment post (KK) engages to the round hole and the screws
(HH) engage to the key slots.
□
Firmly tighten the two mounting screws (HH).
□
Align the oval shape on the canopy (C) with canopy bottom
cover (FF).
□
Push up the canopy bottom cover (FF) until the screw (HH)
heads engage to the slots on the canopy bottom cover (FF) so
that the magnetic canopy bottom cover (FF) can be attached
to the bottom of the canopy (C) properly.
Assembly - Attaching the Fan Blades
1
Attaching the blades to the
blade arms
NOTE: Your fan blades are reversible. Select the blade side
finish which best accentuates your decor.
□
Attach a blade (G) to blade bracket (H) by inserting the screws
(EE) into the holes in the blade (G) and through the blade
bracket (H).
□
Tighten each screw securely.
□
Repeat this step for each blade and blade bracket.
KK
WiFi antenna mount
outside of the canopy
H
11
Please contact 1-877-592-5233 for further assistance.
K
A
HH
C
B
FF
D
E
View after installation
EE
G
HOMEDEPOT.COM/HUBSPACE