Ayuda En Caso De Problemas - Gira 5453 00 Manual De Instrucciones

Emisor universal inalámbrico de 2 elementos Mini
Operating mode
Advanced device settings
Parameter name
Manual commissioning
Repeater mode
Switching edge E1
Switching edge E2
Extended channel settings
Parameter name
Manual commissioning
Local Operation

6.3 Ayuda en caso de problemas

Tras pulsar la tecla, el LED de estado parpadeará rápidamente durante
3 segundos en rojo.
Causa: el tiempo de envío máximo admisible (Duty Cycle Limit regulado legalmente) está prác-
ticamente agotado. Para garantizar la función del emisor se desconecta temporalmente la peti-
ción y el indicador del estado de suma. En cuanto se disponga de nuevo de un tiempo de envío
suficiente, un nuevo accionamiento de la tecla permitirá consultar de nuevo el estado de suma.
Tras un breve tiempo de espera, por lo general unos segundos, pulsar de nuevo el emisor.
Reducir el número de accionamientos.
32580832 10864955
App use, lock-out protection,
forced operation, wind alarm,
sun protection, twilight
Basic setting: App use
Setting options, Basic set­
ting
On, Off
Basic setting: On
On, Off
Basic setting: Off
Rising, falling
Basic setting: Rising
Rising, falling
Basic setting: Rising
Setting options, Basic set­
ting
On, Off
Basic setting: On
On, Off
Basic setting: On
27.04.2017
Setting the type of scene used
for a scene button. Setting is
always made in pairs.
Explanations
Disables manual commissio-
ning for all device channels.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
In addition to its other func-
tions, the device can be used
as a repeater. In the "On" set-
ting, the device repeats all the
received telegrams.
Specifies whether input 1
reacts to a rising or a falling
edge.
Rising: Control with NO con-
tact push-button
Falling: Control with NC con-
tact push-button
Specifies whether input 2
reacts to a rising or a falling
edge.
Rising: Control with NO con-
tact push-button
Falling: Control with NC con-
tact push-button
Explanations
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
Blocks the input for local ope-
ration.
15/16