Descargar Imprimir esta página

asalvo baby TOKYO Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

TOKYO STROLLER INSTRUCTIONS
CAUTION: Press the brake lever when the chair is stationary to prevent sudden
movement. Push the chair to check that the locks are in the correct position.
The safety bar can be removed to make it easier to place the baby in the seat.
Just press the side button and pull the bar. To put it back in place, just press lightly.
CAUTION: When attaching the front bar, pull the front bar to ensure that it is
properly installed.
To open the safety harness, press the central button on the buckle and pull the straps.
Adjust the harness according to your baby's needs.
To close the safety harness, align the buckles and insert them into the center piece
until you hear a "click". Make sure they are properly positioned and do not come loose.
CAUTION: For safety, wear the safety harness at all times and place the belt
between the child's legs with the safety latch fastened. Make sure you do not
hurt the child at any time.
Step 1: Close the canopy (Fig. 10).
The canopy has two levers on the sides. Lift them up and pull the canopy back until
it is completely closed.
Step 2: Release the folding lock (Fig. 11).
There is a folding lock on the back of the wheelchair. It must be lifted to release the
folding lock so that the wheelchair can be folded.
close the saddle completely and secure with the hook to prevent it from opening.
11

Publicidad

loading

Este manual también es adecuado para:

206802069720703