Publicidad
Idiomas disponibles
Idiomas disponibles
en
DANGER
Risk of fatal electrical shock!
Before all work deactivate power supply and guard against accidental switch-on. Due to the
presence of dangerous contact voltage, work on the control module must not be started un-
til 5 minutes have elapsed.
• Check whether all connections (including potential-free contacts) are voltage-free.
• Never reach into the open control module and never drop or insert objects into the open-
ing.
• Never switch on the pump if the cover or the module is not properly attached.
WARNING
Risk of personal injury!
• Adhere to existing accident prevention regulations.
WARNING
Risk of burns from hot surfaces!
Pump housing and glandless motor can get hot and cause burns when touched.
• Only touch the control module during operation.
• Allow the pump to cool down before commencing any work.
NOTICE
Observe the installation and operating instructions of the respective pump!
7.1
Installation
The installation of the Wilo-Connect module is described in the Stratos PICO installation and operating in-
structions.
CAUTION
Moisture and leakage water can destroy the control module.
Only work on an open module in a dry environment.
The Wilo-Connect module BMS is plugged into the Wilo-Connectivity Interface, below the lockable module
cover of the pump:
•
Open module cover
38
Installation and operating instructions • Wilo-Connect module BMS • Ed.02/2023-10
Publicidad
