Publicidad
Two people are needed to install the display on the stand using the supplied Cisco
lifting handles. Position shoulder washers and screw into the "key hole" slot as
shown and continue holding display.
2.
Attach Display to Stand
Immediately use (4) "B" 5/16-18 Bolts screws to affix the mounting brackets to the bracket as
shown. Tighten all screws firmly. Cisco lifting handles can be removed after installation
B x 4
TIP - With larger screens it is more accessible to install locking screws with the
stand all the way down and standing on a ladder
Salamander XL Electric Lift Mobile Stand Designed for Cisco Webex Board Pro 75"
501-659 [6.22]
page 8 of 24
Publicidad
