Publicidad
Idiomas disponibles
Idiomas disponibles
When the timer reaches zero, the oven will
switch off and an audible warning will
sound. The symbols " " and
Turn both control knobs to the "0" position
and press any key on the timer to stop the
warning sound. The symbol will disappear
and press " " button the timer will switch
back to manual function.
Sound Adjustment
To adjust the volume of the audible warning
sound, while the current time of day is
displayed, press and hold the "-" button for
3 seconds until an audible signal sounds.
"ton1" will appear on the display screen.
After this, each time the "-" button is
pressed, a different signal will sound. There
are four different types of signal sounds.
If "OFF" is selected, all sounds will be
turned off except alarm and error sounds.
Select the desired sound and do not press
any other buttons. After a short time, the
selected sound will be saved.
Brightness adjustment
To adjust the display screen brightness,
press and hold the "+" button for 3 seconds.
"br1" will appear on the display screen.
After this, each time the "+" button is
pressed, a different brightness will appear.
2. Press " " until you
see "dur" and
symbol on the display
screen. The time and
the symbols " " and
will flash.
3. Select the desired
cooking time period
using the "+" and "-"
keys.
4. The current time will
reappear on the
screen, and the
symbols " " and
remain illuminated.
will flash.
The Thermostat symbol
Accessories
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
7
6
4
3
will
2
1
•
Insert the accessory to the correct
position inside the oven.
•
Allow at least a 1 cm space between the
fan cover and accessories.
•
Take care removing cookware and/or
accessories out of the oven. Hot meals
or accessories can cause burns.
•
The accessories may deform with heat.
Once they have cooled down, they will
recover their original appearance and
performance.
•
Trays and wire grids can be positioned
on any level from of 1 to 7.
•
Telescopic rail can be positioned on
levels T1, T2, 3, 4, 5, 6, 7.
•
Level 3 is recommended for single level
cooking.
•
Level T2 is recommended for single
level cooking with the telescopic rails.
•
Level 2 and Level 4 are recommended
for double level cooking.
•
The turnspit wire grid must be
positioned on Level 3.
•
Level T2 is used for turnspit wire grid
positioning with the telescopic rails.
****Accessories may vary depending on the
model purchased.
The Deep Tray
EN - 18
The thermostat symbol
( ) automatically
activates during oven
thermostat is running.
5
T2
T1
Publicidad
