Craftsman 126.32565 Manual Del Operador página 19

,_ CAUTION I
Dispose of the contents of the dust collection
bag in an environmentally responsible way.
It may be necessary to wear a dust mask
when emptying the dust collection bag.
WARNING I
Always remove the dust collection bag
before cutting metallic materials to
prevent the possibility of fire resulting from
combustion between wood sawdust and
metallic fragments.
INSTALLING THE HOLD DOWN CLAMP
(Fig. C)
Two sockets (one on either side) are incorporated
into the rear of the machines fence.
1. Fit the clamp into the retaining socket that
best suits the cutting application, ensuring
that it is fully pushed down.
2. Tighten the fence thumbscrew to lock the pillar
of the Hold Down Clamp into the fence socket.
3. Put the workpiece to be cut onto the saw bed.
4. Adjust the clamp using the thumbscrew
and hand-wheel so that it securely holds the
workpiece to the saw bed. Ensure that the
clamp does interfere with the blade path.
(Fig. C)
INSTALLING OR REMOVING A BLADE
I,A WARNING I
Only use blades which are designed for
this machine.
Ensure that the maximum speed of the
blade is compatible with the machine. Only
carry out this procedure with the machine
disconnected from the power source.
NOTE: Wear protective gloves when
handling the blade during installation and
removal.
1. Ensure the Cutting Head is up.
2. Push the catch downwards on the front of
the auxiliary guard, and swing the auxiliary
guard outwards to expose the arbor bolt.
(Fig. D)
(Fig. D)