Drexon BH-1701E Manual Del Usuario página 35

CAUTION: the template must be perfectly horizontal: use a level.
The 6 holes to be drilled must be very precisely marked. Check the
distances shown in the drawing below.
2. Drill the 6 fixing holes using a 6 mm diameter drill bit and insert
wall plugs suitable for your wall into the holes.
3. Remove the bottom wall bracket from the appliance after unscrew-
ing the 5 fixing screws.
4. Fix the bottom bracket to the wall (5 screws).
Rev 0_04 05 23 Fabriqué en Chine Page 35