Domo DO7354M Manual De Instrucciones página 37

· If necessary, dust particles accumulated in the air outlet openings may be removed with a vacuum
cleaner. This maintenance should be done regularly to assure the good operation of the appliance.
Dust particles in the appliance may cause over-heating.
· Store the appliance in a clean and dry place.
PROBLEM AND SOLUTION
PROBLEM
The appliance will stop working.
SPECIFICATIONS
Model identifier(s): DO7354M
Item
Heat output
Nominal heat output
Minimum heat output
(indicative)
Maximum continuous
heat output
Auxiliary electricity
consumption
At nominal heat
output
At minimum heat
output
In standby mode
www.domo-elektro.be
Symbol Value Unit
Pnom 1,5 kW
Pmin 0,8 kW
Pmax,c 1,5 kW
-- -- --
elmax 0,0000 kW
elmin 0,0000 kW
elSB 0,0000 kW
SOLUTION
· Make sure the appliance is stable and upright.
· The appliance is equipped with overheating
protection. This automatically switches off
the heating element when it overheats due to
covering. If this happens, switch off the device
and wait until it has cooled down sufficiently
(±10 minutes). Remove whatever is covering
the grid. Then turn the appliance back on. The
appliance should now function normally again.
If the problem persists, contact your nearest
customer service centre.
Item
Type of heat input, for electric storage
local space heaters only
manual heat charge control,
with integrated thermostat
manual heat charge control
with room and/or outdoor
temperature feedback
electronic heat charge control
with room and/or outdoor
temperature feedback
fan assisted heat output
Type of heat output/room temperature
control
single stage heat output and
no room temperature control
Two or more manual stages,
no room temperature control
with mechanic thermostat
room temperature control
Unit
No
No
No
No
No
No
Yes
37
DO7354M