Domo DO7353H Manual De Instrucciones página 58

After 150 hours of use, the symbol ! will appears on the display and a signal will sound. Clean the
·
outlet and filter. Dust particles in the appliance may cause overheating. Press "OK" to deactivate the
sound signal and symbol.
· Remove dust from the air outlet with a vacuum.
· Remove the dust filter at the back of the appliance. Clean the filter in warm soapy water. Dry
thoroughly.
· Store the appliance in a clean and dry place. When not in use, store the unit in its packaging.
PROBLEM AND SOLUTION
Nothing appears on the display.
The appliance does not heat up.
The appliance is heating continuously.
The appliance is not following the weekly
schedule.
The symbol ! will be shown on the display.
The display will show "EE".
58
DO7353H
PROBLEM SOLUTION
Check that the plug is placed in the socket and
that the switch on the back is on.
· Is the temperature in the room higher than the
set temperature?
· Is the power setting on ventilation
Check the programming.
· Check that the correct date and time have
been set.
· Check that the programme function has been
enabled.
Clean the filter and air outlet as described under
"cleaning and maintenance". Press "OK"
The temperature sensor is broken. Contact the
aftersales department for repairs.
?