OPERATING INSTRUCTION
EN
CORDLESS KETTLE C260B/C260C
GENERAL DESCRIPTION
1. Spout + net lter
2. Opening lid
3. Lid release handle
4. Handle
5. On/o switch
6. Water level indicator
7. Base
TECHNICAL DATA
power: 2000W
mains voltage: 220240V, ~50/60Hz
1.7 litre capacity
Cordless kettle C260B/C260C is or boiling water. It is possible to boil 0.5 – 1.7 litre o water in
the kettle.
The kettle base (7) must be put on a fat and dry surace. In the base there is some space or an
excess cord. It is important or the cord to be led rom the base (7) through a special groove so
that the appliance could be stable.
Beore using the kettle or the rst time ll it up (23 times) with water, boil the water and then
empty the kettle.
The kettle can be lled with water directly through the spout (1) or ater opening the lid (2).
In order to open the lid (2) you must press the button (3) (photo 1). The lid should be closed
by pressing until you hear it snapp. The kettle must not be lled up when on the base. The
minimum level o boiling water is 0.5 l. The maximum water level (1.7 l) is marked on the
indicator (6). The kettle starts working ater putting the switch (5) in the position 'I'. The kettle
working is signalled by the control lamp. The kettle switches o automatically ater the water
has boiled. You can stop heating water at any time by putting the switch (5) in the position '0'.
10
1
7
2
3
6
4
5