Descargar Imprimir esta página

Ryobi RY72ZTRX76 Manual Del Usuario página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
CHARGER LED INDICATOR
Battery
Charger
pack
status
inserted
Power on
No
Testing
Yes
Error
Yes
Charging
Yes
Ready
Yes
MAINTENANCE SCHEDULE
Check the brake operation.
Check the tyre pressure.
Check the side discharge chute and
operator presence safety interlock
systems.
Check for loose fasteners.
Remove all foreign materials from the
product.
Check / Replace the mulching blades.
Clean the battery terminals.
Check and charge the battery.
NOTE: Maintenance should be performed more frequently when the product is used in dusty areas.
When the product has exceeded the maximum fi gures specifi ed in the table, maintenance should still be cycled according to the intervals of
time or hours stated herein.
If you are unsure how to perform any of the maintenance items listed above, have the product serviced by an authorised service centre only.
Battery
Green
Red LED
pack
LED
-
On
Off
Hot
Off
Off
Cold
Off
Off
-
Flash
Flash
-
Off
Flash
-
Off
On
Inspect before
Every 25 hours
each use
x
x
x
x
x
x
x
Orange
LED
The charger is connected to the power supply.
Off
Connect to a battery pack or product to begin
charging.
The charger begins charging once the battery pack
cools down.
On
The charger begins charging once the battery pack
warms up.
If the status does not change after removing
and reconnecting the charger, charge a
different battery pack or product.
Off
If a different battery pack or product charges
normally, contact an authorised service centre.
If a different battery pack or tool still shows an
error status, replace the charger.
Off
The battery pack or product is charging.
Charging is complete. The LED indicator will turn off
Off
after 10 minutes.
Every 50 hours
Before storage
or yearly
x
x
Action
Once a month
during storage
x
x
x
11
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO

Publicidad

loading