Publicidad
Idiomas disponibles
Idiomas disponibles
The purpose of safety symbols is to attract your
attention to possible dangers. The safety symbols, and
their explanations, deserve your careful attention and
understanding.
The safety warnings do not by
themselves eliminate any danger. The instructions or
warnings they give are not substitutes for proper
accident prevention measures.
SYMBOL
MEANING
,_
SAFETY ALERT SYMBOL:
Indicates
danger, warning, or caution.
Attention
is
required in order to avoid serious personal
injury. May be used in conjunction
with other
symbols
or pictographs.
NOTE: Advises you of information or instructions vital
to the operation or maintenance of the equipment.
DANGER: Failure to obey a safety warning
will result in serious injury to yourself or to
others. Always follow the safety precautions
to reduce the risk of fire, electric shock, and
personal
injury.
WARNING:
Failure to obey a safety warning
can result in injury to yourself
and others.
Always follow the safety precautions
to
reduce the risk of fire, electric shock, and
personal
injury.
_
AUTION:
Failure to obey a safety warning
may result in property damage or personal
injury to yourself or to others. Always follow
the safety precautions
to reduce the risk of
fire, electric shock, and personal injury.
IMPORTANT
SAFETY INFORMATION
READ ALL INSTRUCTIONS
BEFORE
OPERATING
• Read the instructions carefully. Be familiar with the
controls and proper use of the unit.
• Do not operate this unit when tired, ill, or under the
influence of alcohol, drugs, or medication.
• Children and teens under the age of 15 must not use
the unit, except for teens guided by an adult.
• All guards and safety attachments
must be installed
properly before operating the unit.
• Inspect the unit before use. Replace damaged parts.
Check for fuel leaks. Make sure all fasteners are in
place and secure. Replace parts that are cracked,
chipped, or damaged in any way. Do not operate the
unit with loose or damaged parts.
• Use only 0.095 in (2.41 mm) diameter genuine
Craftsman®
replacement line. Never use metal-
reinforced line, wire, or rope, etc. These can break off
and become dangerous projectiles.
• Be aware of the risk of injury to the head, hands and feet.
• Clear the area to be cut before each use. Remove all
objects such as rocks, broken glass, nails, wire, or
string which can be thrown or become entangled in
the cutting attachment.
• Clear the area of children, bystanders and pets. At a
minimum keep all children, bystanders and pets outside a
50 ft. (15 m.) radius; there still may be a risk to bystanders
from thrown objects. Encourage bystanders to wear eye
protection. If you are approached, stop the engine and
cutting attachment immediately.
• Squeeze the throttle control and check that it returns
automatically
to the idle position. Make all adjustments
or repairs before using unit.
SAFETY WARNINGS
FOR GAS UNITS
WARNING: Gasoline is highly flammable, and its vapors
can explode if ignited. Take the following precautions:
• Store fuel only in containers specifically designed and
approved for the storage of such materials.
• Avoid creating a source of ignition for spilled fuel. Do
not start the engine until fuel vapors dissipate.
• Always stop the engine and allow it to cool before
filling the fuel tank. Never remove the cap of the fuel
tank, or add fuel, when the engine is hot. Never
operate the unit without the fuel cap securely in place.
Loosen the fuel tank cap slowly to relieve any pressure
in the tank.
• Mix and add fuel in a clean, well-ventilated
area
outdoors where there are no sparks or flames. Slowly
remove the fuel cap only after stopping engine and
allowing it to cool. Do not smoke while fueling or
mixing fuel. Wipe up any spilled fuel from the unit
immediately.
• Move the unit at least 30 ft. (9.1 m) from the fueling
source and site before starting the engine. Do not
smoke; keep sparks and open flames from the area
while adding fuel or operating the unit.
-3-
Publicidad
