Publicidad
Idiomas disponibles
Idiomas disponibles
7. GENERAL DESCRIPTION
7.1 Drawing and description of the parts
Parts list
A- Seat
B- Lifting piston
C - 5-spoke base
D - Swivel casters
8. ASSEMBLY
8.1 Stool assembly
1. Open the packing box and check that the content corresponds to the requested model and the
parts have not been damaged by the transportation. Otherwise, please contact immediately
your reseller.
N.B. – For assembling these stools no other tool is requested. (Fig.1)
1.
Fit the swivel casters into the 5-spoke base, until you hear a "click";
2.
Fit the piston into the central housing hole of the base;
3.
Fit the seat into the piston which has been just assembled.
9. BEFORE EACH USE
• Always check the mechanical parts for wear so that you can guarantee a totally safe use of
the
device for people and things
• Check the correct assembly of the device
10. INSTRUCTIONS FOR USE
10.1 For models MI474A - MI474B - MI474BLU - MI474N - MI474V - MI477B - MI477N -
MI477V MI478N - MI479A -MI479B - MI479BLU - MI479N - MI479V - MI480N:
The stools are equipped with a gas-operating system piston and an activation handle, placed
under the seat. In order to raise or lower the seat, activate manually the handle. Release it to
block the piston again.
10.2 For models MI476B - Mi476BLU - MI476N - MI476V:
These stools are equipped with a screw-lifting system piston, without any activation handle.
Screw the seat counter-clockwise to raise the stool; screw the seat clockwise to lower it.
Fig.1
5
Publicidad
