Publicidad
Idiomas disponibles
Idiomas disponibles
CA E AND c[EANINc
REGULAR CLEANING
WARN|NG',
= Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning
can cause serious injury,fire, electrical shock or death.
• Never use harsh chemicals,
abrasive
cleaners,
or solvents
to clean the washer.
They will damage the finish.
Cleaning
the Exterior
Proper care of your washer can extend its life.
The outside of the machine can be cleaned with
warm water and a mild, nonabrasive household
detergent.
Immediately wipe off any spills with a soft, damp
cloth.
IMPORTANT: Do not use methylated spirits,
solvents, or similar products.
Never use steel wool or abrasive cleansers; they
can damage the surface.
Care and Cleaning
of the Interior
Use a towel or soft cloth to wipe around the
washer door opening, door seal, and door glass.
These areas should be kept clean to ensure a
watertight seal. Be sure to wipe under the inside
rubber seal to remove any moisture or soil.
Always remove items from the washer as soon
as the cycle is completed.
Leaving damp items
in the washer can cause wrinkling, color transfer,
and odor.
Run the TUB CLEAN cycle regularly to remove
detergent buildup and other residue.
Storing
the Washer
If the washer will not be used for an extended
period of time and is in an area that could be
exposed to freezing temperatures:
O
Turn off water supply tap.
Disconnect
hoses from water supply and
drain water from hoses.
O
Plug the power cord into a properly grounded
electrical outlet.
O
Add 1 gallon of nontoxic recreational vehicle
(RV) antifreeze to the empty wash drum.
Close door.
Select the spin cycle and let washer
spin
for 1 minute to drain out all the water.
O
O
NOTE: Not all of the RV antifreeze will be
expelled.
Unplug the power cord, dry the drum interior
with a soft cloth, and close the door.
Remove the inserts from the dispenser. Drain
any water in compartments
and dry the
compartments.
Store the washer in an upright position.
To remove the antifreeze from the washer
after storage, run washer through a complete
cycle using detergent.
Do not add laundry!
Removing
Lime Buildup
If you live in an area with hard water, lime scale
can form on internal components
of the washer.
Use of a water softener is recommended
in areas
with hard water. If a descaler is used, make sure
that it is suitable for use in a washer, and run the
TUB CLEAN cycle before washing clothing.
Lime scale and other spots may be removed
from the stainless steel drum using a stainless
steel cleaner. Do NOT use steel wool or abrasive
cleansers; they can damage the surface.
26
Publicidad
