Publicidad
Idiomas disponibles
Idiomas disponibles
Failure to comply with these instructions may result
in a hazardous situation which, if not avoided, may
result in injury.
Spiders and small insects can spin webs and nest
in the grill Burner
transit and ware-
housing which
flow obstruction
resulting in
urner Tubes.
This type
_use serious
grill
con-
dition
month i
active in
used for at
iK FIRE
follows
once a
3iders are
not been
1. Remove the screws from the rear of each Main Burner
using a Phillips Head Screwdriver.
2. Carefully lift each Burner up and away from the Gas
Valve Orifice.
3. Check and clean BurnerNenturi Tubes for insects and
insect nests. A clogged tube can lead to a fire beneath
the grill.
4. Refer to the figure below and perform one of these
3 cleaning methods:
[]
METHOD 1: Bend a stiff wire or wire coat hanger
into a small hook as shown
and run the hook
through
the Burner Tube and inside the Burner
several times to remove debris.
I[
Z-
"i
TO CLEAN BURNER TUBE,
INSERT HOOK
HERE
Burner Port
/
Foot
\Burner Tube
[]
METHOD 2: Use a bottle brush with a flexible handle
and run the brush through the Burner Tube and
inside the Burner
several times to remove any
debris.
[]
METHOD 3: Use an air hose to force air through
each
Burner Tube.
The forced
air should
pass
debris or obstructions
through the Burner and out
the Ports.
For safe operation ensure the Gas Valve Assembly
Orifice is inside the Burner Tube before using your
grill. See figure. If the Orifice is not inside the Burner
Tube, lighting the Burner may cause explosion and/
or fire resulting
in serious
bodily
injury and/or
property damage.
Gas Valve Assembly
Orifice
BurnerTube
To expedite the assembly process follow these
general guidelines:
[] Tools
Required
for Assembly
:
• protective work gloves
• Phillips Head Screwdriver
[]
For
your
safety,
obtain
assistance
from
another
person
when
assembling
this gas grill.
[]
Use the Hardware and Part Diagrams to ensure all
items are included and free of damage.
[]
Do not assemble or operate the grill if it appears dam-
aged. If there are damaged
or missing parts when
you unpack the shipping box or you have questions
during the assembly process, call the:
Grill Information Center 1-888-317-7642
8am-8pm CST, Monday throuqh Friday
Grill Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1/NFPA
54, Storage and Handling of Lique-
fied Petroleum
Gases, ANSI/NFPA58,Natural
Gas and
Propane Installation
Code, CSA B149.1, Propane Stor-
age and Handling Code, B149.2.
1. Do not store or use gasoline
or other
flammable
liquids
or vapors
in the vi-
cinity
of this or any other appliances.
2. An LP cylinder
not connected
for use
shall not be stored
in the vicinityofthis
or any other
appliance,
When using electrical appliances,
basic safety
precautions
should always be used.
This appliance, when installed,
must be electri-
cally grounded in accordance
with local codes
or, in the absence
of
local codes,
with the
National Electrical Code, ANSI/NFPA
70, or the
Canadian
Electrical
Code, CSA C22. 1.
• Keep any electrical
supply cord and the fuel
supply hose away from any heated surfaces.
Publicidad
