Publicidad
Idiomas disponibles
Idiomas disponibles
OPTIONAl_ACCESSORIES
STACKING KiT iNSTALLATiON
This stacking
kit includes:
• Two (2) side rails
• One (1) front rail
• Four (4) screws
TOOLS Needed
for Installation:
• Phiflips-head screwdriver
To ensure safe and secure installation, please
observe the following instructions.
WARN|NG
• incorrect
installation can cause serious
accidents.
• The weight of the dryer and the height of
installation make this stacking procedure too
risky for one person. Two or more people are
required when installing the stacking
kit.
There is a risk of serious back injury or other
injuries.
• Do not use the stacking
kit with a gas dryer
in potentially unstable conditions
such as a
mobile home. Failure to follow this warning can
result in serious injury.
Place the washer on a solid, stable, level
floor capable
of supporting
the weight of
both appliances.
Failure to follow this warning
can result in serious injury.
• Do NOT stack the washer on top of the dryer.
Failure to follow this warning can result in
serious injury.
• if appliances
are already installed,
disconnect
them from all power, water, or
gas lines and from draining
or venting
connections.
Failure to do so can result in
electrical shock, fire, explosion, or death.
42
Make sure the surface of the washer is clean
and dry. Remove paper backing from the
tape on one of the stacking kit side brackets.
tFotp ha e __oebr ?c kt h tet°bhvees ildues _r fa _ihoen .w_i sh?;
press the adhesive area of the bracket to the
washer surface. Secure the side bracket to
the washer with a screw on the back side of
the bracket. Repeat steps 1 and 2 to attach
the other side bracket.
Publicidad
