Inserting And Removing The Hearing Instrument - Rexton BTE Serie Manual De Instrucciones

INSERTING AND REMOVING THE
HEARING INSTRUMENT
INSERTING THE INSTRUMENT
Take the earmold between your thumb and forefinger and insert into your
ear. Gently work the earmold into its proper position by slightly adjusting
it until it is firmly seated in your ear. Then, lift the hearing aid over the top
of your ear, and adjust it to fit behind your ear. Press slightly for a secure
and comfortable fit.
For an Open Fit instrument, place the retention strand into the bottom of the "bowl"
of your ear.
REMOVING THE INSTRUMENT
When removing the instrument from your ear, gently push on the back of
the ear to help release it and carefully pull it out.
For an Open Fit instrument, gently pull the Open Fit Tube and Open Fit Tip out of
the ear.
WARNING!
Always wear the Open Fit instrument with the Open Fit Tip.
• Make sure that the Tip is completely attached to the Tube.
• Change the Tube or Tip when they are cracked.
• Put the Tube with the Tip carefully and not too deep into the ear.
• Use the Tube and Tip only in the way described in this user guide.
ENGLISH
Retention
Strand
15