Craftsman 113.177690 Manual Del Propietário página 7

Assembly (continued)
Insert Hose
Insert the hose locking end of the "Pos-I-
Lock ®'` hose into the inlet of the Vac. The
hose should snap into place. To remove
the hose from the Vac, press the release
button in the hose assembly and pull the
hose out of the Vac inlet, as shown.
Press
Release and
it° i Pull
Accessory Storage
Your accessories may be stored in the
caster feet. The hose may be stored by
wrapping it around the unit and plugging
the open end into one of the storage
locations on the caster feet.
Accessory
Storage Location
Hose
Power
Y
Open End
Of Hose
1=7/8" Accessory
Storage Location
Push Button
End Of Hose