KRESS MISSION KR233 Instrucciones De Usuario página 5

- After striking a foreign object to inspect the
machine for damage;
- If the machine starts to vibrate abnormally,
and to check for damage before restarting.
e) It is not permitted to modify the original
design of robotic lawnmower. All
modifications are made at your own risk.
f) Start robotic lawnmower according to the
instructions. When the power is on, make
sure you keep your hands and feet away from
the rotating blades. Never put your hands
and feet under the mower.
g) Never lift up robotic lawnmower or carry it
when the power is on.
h) Do not let persons who do not know how
robotic lawnmower works and behaves use
the mower.
i) Do not put anything on top of robotic
lawnmower or its charging base.
j) Do not allow robotic lawnmower to be used
with a defective blade disc or body. Neither
should it be used with defective blades,
screws, nuts or cables.
k) Always switch off robotic lawnmower when
you do not intend to use the mower. Robotic
lawnmower can only start when the power
is on and the correct PIN code has been
entered.
l) Keep your hands and feet away from the
rotating blades. Never place your hands or
feet close to or under the body when robotic
lawnmower is in operation.
m) To avoid using the machine and its
peripherals in bad weather conditions
especially when there is a risk of lightning.
n) Not to touch moving hazardous parts before
these have come to a complete stop.
o) For machines used in public areas, that
warning signs shall be placed around the
working area of the machine. They shall show
the substance of the following text:
Warning! Automatic lawnmower! Keep away
from the machine! Supervise children!
2. Additionally when the appliance is
operating automatically
a) Do not leave the machine to operate
unattended if you know that there are pets,
children or people in the vicinity.
Maintenance and storage
WARNING! When the mower is turned
upside down the power must always
be off.
The power should be off during all work on
the mower's underframe, such as cleaning
or replacing the blades.
a) Keep all nuts, bolts and screws tight to
be sure the appliance is in safe working
condition.
b) Inspect the robotic lawnmower each week
and replace worn or damaged parts for
safety.
c) Check especially that the blades and blade
disc are not damaged. Replace all blades and
screws at the same time if necessary so that
the rotating parts are balanced.
d) Ensure that only replacement cutting means
of the right type are used.
e) Ensure that batteries are charged using
the correct charger recommended by the
manufacturer. Incorrect use may result in
electric shock, overheating or leakage of
corrosive liquid from the battery.
f) In the event of leakage of electrolyte flush with
water/neutralizing agent, seek medical help if
it comes into contact with the eyes etc.
g) Servicing of the appliance should be
according to manufacturers' instructions.
Recommendation
To connect the machine and/or its peripherals
only to a supply circuit protected by a residual
current device (RCD ) with a tripping current of
not more than 30 mA.
Residual risks
To avoid injuries, wear protective gloves when
replacing the blades.
Transport
The original packaging should be used when
transporting robotic lawnmower over long
distances.
To safely move form or within the working area:
a) Press the STOP button to stop the mower.
You select the four digit PIN code when you
start the mower for the first time.
b) Always switch off robotic lawnmower if you
intend to carry the mower.
c) Carry the mower by the handle at the rear
under the mower. Carry the mower with the
blade disc away from the body.
Safety Warnings for battery pack inside the
tool
a) Do not dismantle, open or shred battery
pack.
b) Do not expose battery pack to heat or
fire. Avoid storage in direct sunlight
c) Do not short-circuit a battery pack. Do
5
EN